Fluke 8846A Programmer's Manual page 52

8845A/8846A
Programmers Manual
[SENSe:]<function>:RESolution(?) <n>
Description Sets the resolution according to the value supplied for n, of the Meter
Parameters <n>
Examples
Query
[SENSe:]<function>:NPLCycles(?) <n>
Description Sets the Meter's integration time for the function specified in <function>,
Parameters <n>
Examples
Query
[SENSe:]TEMPerature:[TRANsducer:]<subfunction>:R0(?) <n>
Description Sets the resistance at zero degrees C specified by <n> for the R0 parameter
Parameters <subfunction> =
Examples
Query
44
function specified in the variable <function>. Resolution is specified in the
same units as the function. i.e., volts for the volts ac and dc functions. This
setting is stored in volatile memory
Not having selectable ranges, an error is returned when using frequency,
period, temperature, diode test, or continuity as the function in the
RESolution command.
= resolution value Desired resolution in volts, amps, ohms, and
MIN
MAX
VOLT:RES 1e-4
CURR:AC:RES 1e-8
VOLT:RES?
VOLT:RES? MIN
based on the number of power line cycles. This setting is stored in volatile
memory
This command is only valid for dc voltage, dc current, temperature, and
resistance (2-wire and 4-wire) functions.
= 0.02 to 100
MIN
MAX
VOLT:DC:NPLC .2
VOLT:NPLC?
CURR:NPLC? MIN
of the temperature function. This setting is stored in volatile memory.
RTD
FRTD 4-wire RTD
<n> = 0 to 1010
TEMP:RTD:R0 120
TEMP:RTD:R0?
farads.
Highest resolution
Lowest resolution
Sets the dc volts resolution to 100 μV.
Sets the ac amps resolution to the 10 pA.
Returns the set resolution for dc volts.
Returns the minimum resolution of the dc volts
function.
sets integration time to a preset value of a
power line cycle (0.02, 0.2, 1, 10, and 100)
0.02 NPLC
100 NPLC
Sets the dc volts integration time to 0.2 of a
power line cycle.
Returns the integration time for dc volts.
Returns the minimum integration time for the dc
current function.
2-wire RTD
Resistance at 0 °C
Sets the resistance a 0 °C to 120 ohms.
Returns the set resistance a 0 °C.