Keyboard Power On - Gigabyte GA-7VT600 1394 User Manual

FPower LED in S1 state
8Blinking
8Dual/Off
FSoft-off by PWRBTN
8Instant-off
8Delay 4 Sec.
FAC Back Function
8Memory
8Soft-Off
8Full-On
F Keyboard Power On
This feature allows you to set the method for powering-on the system.
The option " Password" allows you to set up to 8 alphanumeric characters to power-on the system.
The option " Keyboard 98" allows you to use the standard keyboard 98 to power on the system.
8Password
8Disabled
8Keyboard 98
FMouse Power On
8Disabled
8Enabled
In standby mode(S1), power LED will blink. (Default Value)
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Press power button then Power off instantly. (Default value)
Press power button 4 sec to Power off. Enter suspend if button is
pressed less than 4 sec.
System power on depends on the status before AC lost.
Always in Off state when AC back. (Default value)
Always power on the system when AC back.
Enter from 1 to 8 characters to set the Keyboard Power On Password.
Disabled this function. (Default value)
If your keyboard have " POWER Key" button, you can press the
key to power on your system.
Can' t Power on system by Mouse Event. (Default value)
Can Power on system by Mouse Event.
- 47 -
BIOS Setup