Gigabyte GA-7VT600 1394 User Manual page 57

FPCI/AGP Frequency (MHz)
8The values depend on CPU Host Frequency(Mhz) .
FDRAM Clock (MHz)
8The values depend on DRAM Clock Frequency(Mhz) .
FCPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this
feature.
8Auto
8+5% / +7.5% / +10% Increase voltage range as user selected.
FAGP OverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable
this feature.
8Auto
8+0.1V~+.03V
FDIMM OverVoltage Control
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when
enable this feature.
8Auto
8+0.1V~+.03V
Supply voltage as CPU reguired. (Default value)
Supply voltage as AGP Card reguired. (Default value)
Set AGP voltage from 1.6V~1.8V.
Supply voltage as DRAM module reguired. (Default value)
Set DIMM voltage from 2.6V~2.8V.
- 53 -
BIOS Setup