Gigabyte GA-7VT600 1394 User Manual page 48

FOnboard Serial Port 2
BIOS will automatically setup the port 2 address.
8Auto
Enable onboard Serial port 2 and address is 3F8,Using IRQ4.
83F8/IRQ4
Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value)
82F8/IRQ3
Enable onboard Serial port 2 and address is 3E8,Using IRQ4.
83E8/IRQ4
Enable onboard Serial port 2 and address is 2E8,Using IRQ3.
82E8/IRQ3
Disable onboard Serial port 2.
8Disabled
FUART Mode Select
MThis feature allows you to determine which Infra Red(IR) function of Onboard I/O chip)
Using as IR and set to ASKIR Mode.
8ASKIR
Using as IR and set to IrDA Mode.
8IrDA
Using as standard serial port. (Default Value)
8Normal
FUR2 Duplex Mode(When UART Mode Select isn' t set [Normal])
M This feature allows you to select the IR modes.
IR Function Duplex Half. (Default Value)
8Half
IR Function Duplex Full.
8Full
FOnBoard Parallel port
M This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)
8378/IRQ7
Enable onboard LPT port and address is 278,Using IRQ5.
8278/IRQ5
Enable onboard LPT port and address is 3BC,Using IRQ7.
83BC/IRQ7
Disable onboard parallel port.
8Disabled
FParallel Port Mode
M This feature allows you to connect with an advanced print via the port mode it supports.
Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
8SPP
Using Parallel port as Enhanced Parallel Port IRQ5.
8EPP
Using Parallel port as Extended Capabilities Port using IRQ7.
8ECP
Using Parallel port as ECP & EPP mode.
8ECP+EPP
7VT600 1394 Motherboard - 44 -