Jp1 (Rear Usb Device Wake Up Selection); Jp3: Ps/2 Keyboard Power On - Gigabyte 6OXET Series User Manual

6OXET Series Motherboard
JP1: Rear USB Device Wake up Selection (USB Connector
Please note: To use "USB KB/MS Wakeup from S3" function, set BIOS setting
"USB KB/MS Wake up from S3" to ENABLED and enable jumpers JP1& JP4. To
prevent user confusion, it is recommended to enable jumper JP19 (Front USB
Device wake-up function).
*(Power on the computer and as soon as memory counting starts, press <Del>.
USB You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP",
then select "USB KB/MS Wake up from S3". Remember to save the setting by
pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)

JP3: PS/2 Keyboard Power On

Please note :PS/2 keyboard power on will enable user to power on his computer
by pressing the designated key/keys on the PS/2 keyboard. To enable PS/2
keyboard power on, set jumper JP3 to 1-2, and then enable the PS/2 keyboard
power on function to assign the key/keys of your choice inside the BIOS setup
Menu.
1
Normal
(Default)
Pin No.
Enable Rear USB Device
1-2 close
Wake up
2-3 close Normal (Default)
1
Normal
(Default)
Pin No.
1-2 close PS/2 Keyboard Power on
Enable
2-3 close Normal (Default)
29
USB)
1
Enable
Definition
1
Enable
Definition