Gigabyte GA-7VT600 1394 User Manual page 46

FOnChip IDE Channel0
M When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 1st channel IDE port. (Default value)
8Enabled
Disable onboard 1st channel IDE port.
8Disabled
FOnChip IDE Channel1
M When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 2nd channel IDE port. (Default value)
8Enabled
Disable onboard 2nd channel IDE port.
8Disabled
FOnChip Serial ATA '*'
Enable VT8237 Serial ATA support. (Default value)
8Enabled
Disable VT8237 Serial ATA support.
8Disabled
'* ' If you want find the detailed information for SATA RAID setup installation,
please download "VT8237_SATA_Manual.pdf" at "http:\\www.gigabyte.com.tw"
FAC97 Audio
Enabled Onchip AC97 controller. (Default value)
8Enabled
Disabled Onchip AC97 controller.
8Disabled
FUSB 1.1 Controller
M Disable this option if you are not using the onboard USB feature.
Enabled USB1.1 Controller. (Default value)
8Enabled
Disabled USB1.1 Controller.
8Disabled
FUSB 2.0 Controller
M Disable this option if you are not using the onboard USB 2.0 feature.
Enabled USB 2.0 Controller. (Default value)
8Enabled
Disabled USB 2.0 Controller.
8Disabled
FUSB Device Function
M When a USB Device is installed, please set at Enabled.
Enabled USB Device Support.
8Enabled
Disabled USB Device Support. (Default value)
8Disabled
7VT600 1394 Motherboard - 42 -