Gigabyte GA-7VT600 1394 User Manual page 52

FPME Event Wake up
M When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled
state.
M This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
8Disabled
8Enabled
FModem Ring On/ WakeOnLAN
M You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake
up".
M An incoming call via modem awakes the system from its soft-off mode.
M When set at Enabled, an input signal comes from the other client.
Server on the LAN awaks the system from a soft off state if connected over LAN.
8Disabled
8Enabled
FResume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
8Disabled
8Enabled
If RTC Alarm Lead To Power On is Enabled.
Date ( of Month) Alarm :
Time ( hh: mm: ss) Alarm :(0~23) : (0~59) : (0~59)
7VT600 1394 Motherboard
Disabled PME Event Wake up function.
Enabled PME Event Wake up function. (Default Value)
(When AC Back Function is set to [Soft-Off])
Disabled Modem Ring On / Wake On LAN function.
Enabled Modem Ring On / Wake On LAN function. (Default Value)
Disable this function. (Default Value)
Enable alarm function to POWER ON system.
Everyday, 1~31
- 48 -