Door Removal
WARNING
TO PREVENT PERSONAL
INJURY
Before removing the doors, make
sure the pins are properly
installed in the hinges. Failure to
do so can result in personal injury
to hands and/or fingers.
3
Close until pins stop door.
Door Replacement and Adjustment
1
Reinstall door to range.
4
Close door.
1
Open door completely.
Place pin in pin hole.
4
Lift door up and out.
2
Open door completely.
Reinstall hinge trim.
5
If the door needs to be adjusted, loosen hinge trim
screws located in step 2. Adjust the screws located
between the door and kickplate using a 5/32" hex
head allen wrench. After adjustment, tighten hinge
trim screws.
20
2
Remove hinge trim screws
and hinge trim.
3
Remove pins from hole in hinges.