Table of Contents
Advertisement
Preparing the Machine
Changing the Port Settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client set-
tings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
1
Windows 95 / 98:
A
Open the [Printers] window from the [Start] menu.
B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C
Click the [Details] tab, and then click [Port Settings].
The [Port Settings] dialog box appears.
Windows 2000 / Windows NT 4.0:
A
Open [Printers] window from [Start] menu.
B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C
On the [Ports] tab, click [Configure Port].
The [Configuration] dialog box appears.
Windows XP, Windows Server 2003:
A
Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties]. The printer properties appear.
C
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
Note
❒ For TCP/IP, timeout setting can be configured.
❒ User, proxy, and timeout settings can be configured for IPP.
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow the
procedure below.
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the SmartDe-
viceMonitor for Client icon on the tasktray.
C
Point to [Properties], and then click [Extended Features Settings].
D
Select the [Set Recovery/Parallel Printing for each port] check box.
E
Click [OK] to close the [Extended Features Settings] dialog box.
Reference
For information about these settings, see "Using SmartDeviceMonitor for
Client", Network Guide, or SmartDeviceMonitor for Client Help.
26
Advertisement
Table of Contents
