Programming A Polling Id - Gestetner DSm635sp Fax Manual

Programming a Polling ID

Program a Polling ID to use the
Transfer Request, Transfer Station,
Default ID Polling Transmission, and
Default ID Polling Reception func-
tions. When you use ID Transmission,
program the same ID as the one pro-
grammed on the sender's machine.
Reference
p.10 "Polling Transmission"
p.13 "Polling Reception"
p.52 "Transfer Request"
p.75 "Selecting transmission op-
tions for a single transmission"
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Program Polling ID].
E
Enter an ID using the number
keys and [A] to [F], and then press
[OK].
Note
r A Polling ID can be any combi-
nation of digits (0-9) and letters
(A-F), except 0000 and FFFF.
Using Key Operator Settings
r If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
To cancel programming an ID,
press [Cancel]. The display returns
D
to that of step .
F
Press the {User Tools/Counter} key.
The standby display appears.
Programming a Memory Lock
ID
Program a Memory Lock ID to be en-
tered before printing documents
when the Memory Lock function is
activated.
Note
r A Memory Lock ID can be any
four-digit number, except 0000.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Program Memory Lock ID].
E
Enter an ID using the number
keys, and then press [OK].
9
183