Table of Contents
Advertisement
User Tools (System Settings)
Set Time
When entering Set Time mode, if a key operator code has already been set, you
must enter the code (up to 8 digits).
1
Reference
See "Key Operator Code" in
Menu
Set Date
Set Time
Weekly Timer:Monday
Weekly Timer:Tuesday
Weekly Timer:Wednes-
day
Weekly Timer:Thurs-
day
Weekly Timer:Friday
Weekly Timer:Saturday
Weekly Timer:Sunday
Key Operator Code for
Off Setting
12
P.17 "Count Manager".
Description
Set the date for the copier's internal clock.
Note
You need to set this for the weekly timer to work proper-
ly.
Set the time for the copier's internal clock.
Note
Enter the time using the 24-hour clock (1 second steps).
You need to set this for the weekly timer to work proper-
ly.
Set the time when you want the machine to turn itself on/
off for each day of the week.
Important
The timers do not work if the main power switch is
turned off or the power cord is unplugged.
To keep the power on throughout the day, clear both the
"On Set Time" and "Off Set Time" settings.
Note
Enter the time using the 24-hour clock (1 minute steps).
Set a key operator code (up to 8 digits) to temporarily cancel
the power off setting of the weekly timer.
Note
When the weekly timers are set and the operation switch
is off, you can still use the machine by doing one of the
following:
• If the key operator code is set, turn on the operation
switch and enter the code.
• If the key operator code is not set, just turn on the op-
eration switch.
Advertisement
Table of Contents
