THOMSON Speedtouch 580 Installation And Setup Manual page 20

Chapter 2
Basic Installation
Configuring the
SpeedTouch™ (and your
computer)
14
Proceed as follows:
1
Depending on the selected service profile and your ISP's requirements,
additional settings may be requested to be filled in during the Home Install
Wizard, like Dynamic DNS Service, Time Configuration or other.
Enter the information provided by your ISP and click Next whenever
requested.
2
To protect your SpeedTouch™ from unauthorised access, you must provide a
user name and password. Each time a user wants to access a SpeedTouch™
management interface, the user will be prompted to provide this user name
and password before access is granted.
Click Next to continue.
3
To protect the wireless connections to your SpeedTouch™, move the slide
control to the desired security mode.
Following security modes to secure traffic between the SpeedTouch™ and
connected wireless stations are available:
Low, which implies in fact that no security measures are taken at all
Medium, implying that traffic is encrypted by means of a static
encryption key (WEP).
E-DOC-CTC-20050429-0061 v2.0