Connecting To An Ethernet Network; Broadband Internet Connections - Gateway Solo 5300 User Manual

Connecting to an Ethernet network

If your notebook has a network jack, the notebook can connect to an Ethernet
10/100 network.
To connect to a network:
1
Insert one end of the network cable into the network jack
left side of the notebook.
2
Insert the other end of the network cable into a network wall jack. Ask
your network administrator to help you select the correct network jack.
Your notebook is now physically connected to the network. Your network
administrator can help you log on to your network.

Broadband Internet connections

You can use your computer's Ethernet jack for more than just networking.
Many broadband Internet connections, such as cable modems and DSL
modems, connect to your computer's Ethernet jack. For more information,
see "Using the Internet" on page 63 and "Networking Your Notebook" on
page 179.
www.gateway.com
Connecting to an Ethernet network
on the
31