Connecting To A Wired Ethernet Network - Gateway 450 User Manual

Chapter 2: Getting Started
Connecting to a wired Ethernet
network
Your notebook has a network jack that you can use to connect to a 10/100 wired
Ethernet network.
Important
To connect to a wired Ethernet network:
1
Insert one end of the network cable into the network jack
of your notebook.
2
Insert the other end of the network cable into a network jack. Ask your
network administrator to help you select the correct network jack.
36
Your notebook may be equipped with built-in wireless
Ethernet or you may have a wireless Ethernet PC Card.
For information about connecting to a wired or wireless
Ethernet network, see "Networking Your Computer" on
page 187. For information about installing a wireless
Ethernet PC Card, see "Adding and removing a PC Card"
on page 242.
www.gateway.com
on the back