Reinstalling Windows Nt 4.0 - Gateway Solo 5300 User Manual

Gateway solo 5300: user guide
Hide thumbs Also See for Solo 5300:
Table of Contents

Advertisement

To reinstall Windows 2000 and the device drivers:
1
Place Disc 2 of the System Restoration Kit in the CD/DVD drive. If you have
an additional recordable/rewritable CD drive, make sure you do not put
the System Restoration CD in it.
2
Restart the computer.
3
Press any key when you see the message
The Windows 2000 Setup menu opens.
4
Follow the on-screen instructions. The on-screen instructions step you
through the operating system installation.
5
When you are finished reinstalling Windows 2000, reinstall your device
drivers by following the instructions in "Reinstalling device drivers in
Windows 98, Windows Me, Windows 2000, or Windows XP" on
page 222.

Reinstalling Windows NT 4.0

To reinstall Windows NT 4.0:
1
With Disc 2 of the System Restoration Kit in the CD/DVD drive, restart your
computer.
2
Reinstall Windows NT 4.0 by following the on-screen instructions.
3
After you have reinstalled the operating system, go to "Reinstalling device
drivers in Windows NT 4.0" on page 223, then go to "Reinstalling the
Windows NT 4.0 Service Pack" on page 234.
Press any key to boot from CD
www.gateway.com
Reinstalling Windows
.
237

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents