Reinstalling Device Drivers In Windows Nt 4.0 - Gateway Solo 5300 User Manual

9
Click
Install
10
Follow any additional on-screen instructions. Depending on the device
driver you are reinstalling, you may only need to restart your computer
to complete the installation. However, if a setup wizard opens when you
restart your computer, follow the on-screen instructions.

Reinstalling device drivers in Windows NT 4.0

The Windows NT Driver Locator utility is a tool that lets you locate device
drivers on Disc 1 of the System Restoration Kit. If you have problems with a
hardware device or you have reinstalled Windows NT 4.0, use the CD and the
procedures in this section to reinstall your computer hardware device drivers.
The process for reinstalling the Windows NT 4.0 device drivers includes:
Finding the locations of the device drivers. For more information, see
"Locating Windows NT 4.0 drivers" on page 223.
Reinstalling the device drivers. For more information, see "Reinstalling
Windows NT 4.0 video device drivers" on page 225.
Reinstalling the Windows NT Service Pack. For more information, see
"Reinstalling the Windows NT 4.0 Service Pack" on page 234.
Locating Windows NT 4.0 drivers
Use the Windows NT 4.0 Driver Locator utility to find the device drivers you
need to reinstall. The utility is located on Disc 1 of the System Restoration Kit.
To locate the Windows NT 4.0 drivers:
1
Place Disc 1 of the System Restoration Kit into your CD/DVD drive, then
restart your computer. The Gateway Boot Menu opens.
2
Select
2 Boot from CD-ROM
.
. The Main Menu opens.
www.gateway.com
Reinstalling device drivers
223