Gateway Solo 5300 User Manual page 23

2
Connect the AC adapter to your notebook's power connector.
3
Plug the power cord into a wall outlet.
The battery charge indicator turns on. If the battery charge indicator does
not turn on, disconnect the adapter from your notebook and repeat
Step 2.
4
When you finish using your notebook for the first time, turn the
notebook off and leave the notebook connected to AC power for at least
24 hours.
5
If the battery meters do not show a full charge after 24 hours, contact
Gateway Technical Support at www.gateway.com/support/contact.
Warning Do not attempt to disassemble the AC adapter. The
AC adapter has no user-replaceable or user-serviceable
parts inside. The AC adapter has dangerous voltages that
can cause serious injury or death. Contact Gateway about
returning defective AC adapters.
www.gateway.com
Connecting the AC adapter
17