Replacing The Main Hard Drive - Gateway Solo 5300 User Manual

Chapter 11: Upgrading Your Notebook

Replacing the main hard drive

To replace the main hard drive:
1
Follow the instructions under "Preventing static electricity discharge" on
page 147 for important precautions.
2
Shut down your notebook, then disconnect the power adapter and
modem cable.
3
Turn the notebook over, then remove the main battery (and second
battery, if installed). For more information, see "Changing batteries" on
page 109 and "Installing a second battery" on page 110.
4
Remove the hard drive screw, then pull the drive kit straight out from
the notebook.
5
Place the new hard drive kit in the bay, slide it into the connector, then
replace the screw to secure the hard drive to the notebook.
152 www.gateway.com