Scandisk; Sound - Gateway Solo 3450 User Manual

Chapter 17: Troubleshooting
Wait until files have been printed before sending additional files to the
printer.
If you print large files or many files at one time, you may want to add
additional memory to the printer. Consult the printer documentation for
instructions for adding additional memory.
You receive a "Printer is out of paper" error message
After adding paper, make sure the printer is online. Most printers have
an online/offline button that you need to press after adding paper.

ScanDisk

When you started your computer, it ran ScanDisk
The computer probably had its power interrupted or was incorrectly shut
down. Windows Me and Windows 98 automatically run ScanDisk at startup
when the computer was incorrectly shut down.
ScanDisk fixes errors on the hard drive to minimize data loss. To prevent
ScanDisk from running when you start your computer, make sure you always
shut down by selecting

Sound

You are not getting sound from the speakers
Make sure the Windows volume control is turned up. For more
information, see "Adjusting the volume in Windows XP" on page 87 and
"Adjusting the volume in Windows Me, Windows 2000, and
Windows 98" on page 91.
Make sure that
the volume in Windows XP" on page 87 and "Adjusting the volume in
Windows Me, Windows 2000, and Windows 98" on page 91.
232
from the
Shut Down
is not selected. For more information, see "Adjusting
Mute
www.gateway.com
menu.
Start