Gateway Solo 5100 Maintaining & Troubleshooting page 52

52 Maintaining and Troubleshooting Your Solo Notebook
5. The next window displays the IntelliPoint identification number. Copy this
number down for future product support reference. Click
6. Keep the default installation directory. Click
7. Click to start copying driver files.
Finish
8. Click Close to exit the setup program.
9. Click Restart Windows
reinstalling the Windows NT operating system and need to install additional
drivers, you can click
drivers before restarting.
Windows NT Intel BusMaster IDE drivers
Use the following instructions to install the Windows NT Intel BusMaster IDE
drivers. If the Solo System CD shipped with your system, you may use it to install
the driver instead of installing the drivers from diskette.
Installing the Solo 5100 Intel BusMaster IDE drivers
1. If the floppy drive module is not already installed, shut down the system and
install the floppy drive. Restart Windows.
2. Insert the Solo 5100 Windows NT Intel BusMaster IDE diskette into the
floppy drive.
3. Click Start , Run, and on the command line type:
a:\setup
then click .
OK
4. PIIX IDE Bus Master Driver File Installation Setup window appears. Click
Yes to continue the installation.
5. Click
Yes if you agree to the license agreement.
6. The default installation location appears. Click
7. Click to view the README.TXT file which supplies further installation
Yes
instructions. Close the file and continue with the instruction in this
procedure.
8. Click
Start , Settings
to complete the driver installation. If you are
Return to Windows and continue installing the other
, Control Panel . Double-click
Next .
Next .
OK to continue.
SCSI Adapters icon.