Gateway Solo 5100 Maintaining & Troubleshooting page 17

Follow the onscreen instructions and repeat the steps for creating any
additional logical drives or partitions. You should create partitions in the
following order:
a. Create Primary DOS Partition
b. Create Extended DOS Partition
c. Create Logical DOS Drive(s) in the Extended DOS Partition
To read more about the partition types, see "Partitioning and formatting the
hard drive" on page 12.
Remember that if you choose to make the primary DOS partition less than
the maximum size, you must create an extended DOS partition to make full
use of the hard drive.
4. If you created more than one hard disk partition or logical drive you must set
the partitions to active. Y ou are prompted to set disk 1 partition to active.
Select [ ] to go to the Set Active Partition menu.
2
5. When prompted to enter partition number to make active, enter [
6. Press <Esc> to return to the FDISK Options menu.
7. Press <Esc> to exit the FDISK program.
].
1
Chapter 2: Reinstalling Windows 95 System Software 17