Gateway Solo 5100 Maintaining & Troubleshooting page 44

44 Maintaining and Troubleshooting Your Solo Notebook
4. When the UHCD drivers finish installing, remove the diskette. Click
5. Click
Start , Shut Down
Installing the VMMUSB supplement
1. Place the vmmusbup.exe driver disk in drive A.
2. Click
Start , Run , then type:
a:\ vmmusbup.exe
then click OK .
3. Click Yes to continue with the installation.
4. When the supplement completes the installation, remove the diskette. Click
.
OK
5. Click ,
Start Shut Down
, Restart the computer? to initialize the update.
, to initialize the supplement.
Restart the computer?
OK .