System - Datavideo EPB-1340 Instruction Manual

System

The NVS-31 also allows the user to configure the system's network settings, set account login credentials,
update the device firmware, select the time, restore the factory defaults and reboot the system.
Network Setting
You are allowed to connect the NVS-31 to a network in DHCP or Static IP mode. Disable DHCP server if you
want to connect to the NVS-31 on a fixed IP. An example of Static IP mode configuration is provided below:
 Static IP: 192.168.1.60
 Subnet Mask: 255.255.255.0
 Default Gateway: 192.168.1.254
 Primary DNS: 192.168.1.1
 Secondary DNS: 8.8.8.8
Note: If you do not remember the IP address
assigned to the device, follow the steps below to
reset the network settings:
 Turn off the machine.
 Press the RECORD and STREAM buttons
simultaneously and switch ON the device.
 Wait for 5 seconds approximately and release
the button push as soon as the two buttons
light up.
 The default IP address is 192.168.1.60.
51