Stills - Datavideo EPB-1340 Instruction Manual

Audio
The Audio sub-option for the SDI and HDMI outputs allows the user to individually turn ON/OFF the
embedded audio component for the 17.3" built-in monitor (HDMI) and at the SDI1 and SDI2 output ports
(Sdi1 / Sdi 2).
Mode (On/Off): The HS-1300 can only accept external audio using the analogue XLR inputs on the rear
panel. Ideally a master audio mixer would be used alongside the HS-1300. A Datavideo AM-100 or AD-200
could be considered. By changing the Audio sub option from ON to OFF will mute the incoming XLR audio
from the external master audio mixer.
Level (EBU/SMPTE/AUTO): There are two different audio standards available for selection. The user can
either select the EBU or SMPTE standard. By selecting AUTO allows the device to automatically detect the
audio standard.
Tally Mode
In this sub-option, the user will be allowed to switch to either the Audio Mixer or the regular tally light
connection (Normal).
GPI Out
This allows the user to perform GPI configuration. After turning on the GPI, select the GPI mode, which is
either level or pulse. The pulse width can also be configured in the sub-option Width (1-9). GPI out can
then be assigned to one of Inputs 1-6 and the delay can be set to between 0 and 99. This feature could be
used to trigger playback from an external playback device such as Datavideo's NVP-20 or HRS-30 unit.
Multiviewer
AutoNum: The Multiview windows can be automatically numbered, and this sub-option turns ON/OFF
automatic numbering.
Label Inf: This sub-option turns ON/OFF Label information. Input label is followed by information which
describes the input as still, live or frozen image.
Trns Lab: This sub-option turns ON/OFF Label Transparency. Once enabled, the background of the label is
then turned from a solid colour to transparent.

Stills

Still allows the user to load images from the memory, save images to the memory, and save the images
captured.
Advanced Mode
Stills
Basic Mode
Stills
Load Still
Thumbnail
Picture - 1
Save Still
Grab Still
Freeze 1
4
Load Still
Thumbnail
Picture - 1
Save Still
Load Still Num
Thumbnail Picture
Save Input 5
Grab Input 3
Still 2
Still 5
Load Still Num
Thumbnail Picture
Save Input 5
37
13 Input 5
Thumbnail Picture
+ 1
Still Num
Live 3
Still 6
13 Input 5
Thumbnail Picture
+ 1
Still Num
13
Still
Live
13