Table of Contents
Advertisement
5. The DEFAULT GATEWAY number displayed should be the router's current IP address.
6. Enter the DEFAULT GATEWAY IP address into the address bar of the computer's web browser.
7. The web browser should display the login window for the router. Enter the router's login and/or
password.
The login details may be written on a sticker on the router itself or noted in the manual for the router.
8. Once logged into the router we need to change the router to supply IP addresses in the
192.168.100.xxx range. Use the router's LAN Setup or Configure LAN option to set the router's IP
address as 192.168.100.1 and click save / apply.
9. Now reboot the router and power ON the HS-1300.
10. Log into the router again using the web browser and the router's new IP address 192.168.100.1
11. Use the router's LAN Setup or Configure LAN option again, within this option there should be another
option called Address Reservation or Client List.
12. The two devices connected to the router should be listed here, the computer and the HS-1300.
13. The computer, because it is set for DHCP, will already have an IP address automatically assigned to it in
this list.
14. The HS-1300 will also be listed with its default IP address of 192.168.100.101 if it is not changed.
15. Click save / apply then reboot the router again.
16. Close the web browser and CMD windows.
17. Now install the Switcher Image Import/Export software to the computer.
Setting the Target IP Address with the Switcher Image Import/Export Software
Click Setup button in the MENU SELECT pane and the current IP Network settings are shown alongside the
software version.
22
Advertisement
Table of Contents
