Options - Epson WorkForce AL-M300 Series User Manual

Hide thumbs Also See for WorkForce AL-M300 Series:
Table of Contents

Advertisement

e.
Right button
f.
Down button
g.
Left button
h.
OK button
i.
Up button
j.
Error light (Orange)
k.
Ready light (Green)

Options

You can add to your printer's capabilities by installing any of the following options.
❏ 250-Sheet Paper Cassette Unit (C12C802761) (For AL-M300 Series only)
This unit increases paper feeding capacity up to 250 sheets of paper. You can install only one unit
on your printer.
❏ 550-Sheet Paper Cassette Unit (C12C802771) (For AL-M400 Series only)
This unit increases paper feeding capacity up to 550 sheets of paper. You can install up to three
units.
❏ CompactFlash Memory (For AL-M400 Series only)
This option enables you to store overlay forms, use Reserve Job function, and improve the collate
printing environment. By using the Reserve Job function, you can store print jobs in the printer's
CompactFlash memory and print them later directly from the printer's control panel. By using the
collate printing function, you can print larger and more complex print jobs.
Note:
The CompactFlash memory must be at least 4 GB.
❏ Memory Module
This option expands the printer's memory by allowing you to print complex and
graphics-intensive documents. The printer's RAM can be increased up to 1152 MB by adding an
additional 1024 MB RAM DIMM.
Note:
Make sure that the DIMM you purchase is compatible with Epson products. For details, contact the
store where you purchased this printer or an Epson qualified service representative.
Use these buttons to access the control panel menus, where you can make
printer settings and check the status of consumable products. For instructions
on how to use these buttons, see "Using the Control Panel Menus" on
page 61.
When the error light is flashing, pressing the OK button clears the error and
switches the printer to ready status.
On or flashes when an error has occurred.
On when the printer is ready, indicating that the printer is ready to receive and
print data.
Off when the printer is not ready, or in the sleep mode.
AL-M300/AL-M400 Series
Getting to Know Your Printer
User's Guide
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents