Adding Ncs Channels - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.5

Adding NCS Channels

This section shows you how to add NCS channels to the NCS Channel List. 19
channels can be listed per each ocean region. Currently, there are four NCS
channels, and they are marked with asterisks in the list. Add NCS channels to
the list as below when they become operational.
1. Press the [F8] key to display the Setup menu.
2. Press the [9] key to display the Configuration menu.
3. Press the [4] key to display the NCS Channel List.
4. Use the arrow keys to place the cursor in a blank ID column.
5. Press the [Enter] key to open the data entry window.
6. Enter NCS channel ID number, in two digits (leading zero is not necessary).
The ID number range is 45-63.
7. Press the [Enter] key to close the window.
8. With the [ ] key, choose the frequency column.
9. Press the [Enter] key to open the frequency entry window.
10. Enter NCS channel frequency code. The frequency code range is
6000-14000.
11. Press the [Enter] key to close the window.
12. Press the [Esc] key to open the update window.
13. Yes is selected; press the [Enter] key to register input.
2-20
Setup
Configuration
NCS Channel List
AOR (WEST) AOR (EAST)
No
ID FREQ ID
01 044 11080* 144
02 0 1
03 0 1
04 0 1
05 0 1
06 0 1
07
0 1
08 0 1
NCS channel list
Setup
Configuration
NCS Channel List
AOR (WEST) AOR (EAST)
No
ID FREQ ID
01 044 11080* 144
02 0 1
03 0 1
04 0 1
05 0 1
06 0 1
07 0 1
08 0 1
NCS channel list, update window
ENTER: Set ESC: Quit
POR
FREQ ID FREQ ID
12580* 244 12580* 344
2 3
2 3
2 3
2 3
2 3
2 3
2 3
ENTER: Set ESC: Quit
POR
FREQ ID FREQ ID
12580* 244 12580* 344
2 3
2 3
2 3
2 3
2 3
Yes
2 Yes 3
2 3
IOR
FREQ
10840*
IOR
FREQ
10840*
Update
No