Adding Egc Channels - Furuno Felcom 15 Operator's Manual

2. SYSTEM INITIALIZATION
19. Press the [Esc] key to open the update window.
20. Yes is selected; press the [Enter] key to update EGC settings.
21. Press the [Esc] key to return to the standby display.
2.4.3

Adding EGC channels

The EGC Channel List stores EGC channels. There are currently four EGC
channels, one for each satellite. These four channels are pre-programmed into
the unit and marked in the EGC Channel List with asterisks. When more EGC
channels become available you can add them to the list as below.
1. Press the [F8] key to display the Setup menu.
2. Press the [9] key to display the Configuration menu.
3. Press the [3] key to display the EGC Channel List.
File
4. Using the arrow keys, place the cursor where there is no data entered.
Current EGC channels are marked with an asterisk. These channels cannot
be changed.
2-16
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, update window
Edit Transmit EGC Reports
Setup
Configuration
EGC Channel List
ENTER: Set ESC: Quit
11080* 12580* 10840*
EGC Setup
: :
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
Logs Options
11088*
EGC channel list
OFF
OFF
Update
OFF
Yes OFF No
Setup Position StopAlarm