Accessing The 2-Digit Code Services - Furuno Felcom 15 Operator's Manual

4. INMARSAT C COMMUNICATIONS
4.1.6

Accessing the 2-digit code services

A range of special safety and general maritime services, known as the 2-digit
code services, may be transmitted. The list on the next page shows the 2-digit
code services available.
To access a 2-digit code service do the following:
1. Using the text editor, prepare message requesting a 2-digit code service.
2. Press the [F3] key to open the Transmit menu.
3. Press the [1] key to display the Transmit Message menu.
File
---- * ---------+---------+---------+---------+---------+---------+---------<
4. Press the [ ] key three times to choose Destination Type.
5. Press the [Enter] key to open the destination type options window.
6. Press the [ ] or [↑] key to choose SPEC (Special).
7. Press the [Enter] key to close the window.
8. Press the [ ] key to choose Station ID.
9. Press the [Enter] key to open the station ID entry window.
10. Key in 2-digit code referring to the table on the next page.
11. Press the [Enter] key to close the window.
4-20
Edit Transmit EGC
Transmit
1. Transmit Message
2. Cancel
Priority Normal
3. Request Delivery Status
Message File Message now being edited
Station Name
Destination Type TELEX
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
Subject
25 Char.
Attach File
LES ID
Option
Confirmation ON
Send Delay 00:00
Delivery Delay Immediate
Code IA5
[ TRANSMIT ]
Transmit message menu
Reports Logs Options
<[1] UNTITLED1>
Transmit Message
Size
Cost ********.**(US$)
[ Line 2/ 2 Col.
Setup Position StopAlarm
24
1 ] [Insert ]