Furuno Felcom 15 Operator's Manual page 50

2. SYSTEM INITIALIZATION
7. Press the [Enter] key to open the navarea entry window.
8. Enter additional Navarea(s) (I-XVI, up to nine) in two digits, referring to the
illustration below for code number.
9. Press the [Enter] key to close the navarea entry window.
Note: "Fixed Area" is where you enter fixed areas (max. 3) for chart
10. Press the [ ] key to choose Waypoint.
2-14
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
EGC setup menu, Navarea entry window
correction service. However, this service is not yet available; enter no
data.
EGC Setup
: :
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
Navareas
OFF
OFF
OFF
OFF