System Routing Table - TP-Link TL-WR940N User Manual

Chapter 4
• Subnet Mask
the network portion, and which portion is the host portion.
• Default Gateway
allows the contact between the router and the network or host.
3. Select Enabled or Disabled
4. Click Save.
You can also do the following operations to modify the current settings.
• Click Delete to delete the entry.
• Click Enable All to enable all the entries.
• Click Disable All to disable all the entries.
• Click Delete All to delete all the entries.
• Click Previous to view the information on the previous screen and
information on the next screen.

4. 12. 2. System Routing Table

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced Routing
in use.
• Destination Network
to which the static route is assigned.
• Subnet Mask - The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
• Gateway - This is the IP address of the gateway device that allows for contact between
the Router and the network or host.
• Interface - This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), or the WAN (Internet).
• Click Refresh to refresh the data displayed.
- The Subnet Mask determines which portion of an IP address is
- This is the IP address of the default gateway device that
for this entry on the
> System Routing
- The Destination Network is the address of the network or host
Status drop-down list.
Table, and you can view all the valid route entries
Next to view the
51