Faq - TP-Link TL-WR940N User Manual

FAQ

Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered, please connect your computer to the router using an Ethernet cable and
follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless Security
Q2. What should I do if I forget my login password of the web management
page?
The default username and password of the web management page are
lowercase).
If you have altered the username and password but Password Recovery is disabled:
1. Please press and hold the Reset button for about 7 seconds to reset the router.
2. Visit http://tplinkwifi.net, and enter
log in.
Note: You'll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3. What should I do if I cannot access the router's web management
page?
This can happen for a variety of reasons. Please try the following:
• Make sure your computer has connected to the router correctly and the corresponding
LED light up.
• Make sure the IP address of your computer is configured as
automatically and
• Verify that http://tplinkwifi.net
• Check your computer's settings:
1. Go to Start > Control Panel
1 ) Click Internet Options
2 ) Click Connections
to retrieve or reset your wireless password.
admin
Obtain DNS server address
or 192.168.0.1
> Network and
on the bottom left.
and select Never dial a
(in lowercase) as both username and password to
automatically.
is correctly entered in the web browser.
Internet, and click View network status and
connection.
admin
Obtain an IP address
tasks.
113
(in