TP-Link TL-WR940N User Manual page 104

Chapter 6
• Disable Security
disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
shared passphrase.
• Version - Select Automatic,
• Encryption
• Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
• WPA /WPA2-Enterprise
• Version - Select Automatic,
• Encryption
• Radius Server IP
• Radius Port
• Radius Password
- The wireless security function can be enabled or disabled. If
- It's the WPA/WPA2 authentication type based on pre-
WPA-PSK
- Select Automatic,
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- It's based on Radius Server.
WPA
- Select Automatic,
- Enter the IP address of the Radius server.
- Enter the port that Radius server used.
- Enter the password for the Radius server.
or WPA2-PSK.
TKIP or AES.
or WPA2.
TKIP or AES.
99