The Back Panel - TP-Link TL-WR940N User Manual

Chapter 1
LED Explanation
LED
1. 2. 2.

The Back Panel

The following parts (view from left to right) are located on the rear panel.
Item
Power Port
Power On/Off Button
Reset Button
Status
Orange On Power is on, but there is no internent connection.
Router mode: The router is connected to the internet.
Range Extender mode: The router is connected to the host network.
Blue On
Access Point mode: At least one of the router's WAN/LAN ports is
connected.
The system is starting up or firmware is being upgraded. Do not
Blinking Slowly
disconnect or power off your router.
Blinking
WPS connection is in progress. This may take up to 3 minutes.
Quickly
For connecting the router to a power socket via the provided power adapter.
Press this button to power on or off the router.
Press and hold this button until all the LEDs turn on momentarily to reset the router to
its factory default settings.
Get to Know About Your Router
Indication
Description
4