Installing/Removing The Fanu; Installing The Fanu In The Chassis - Fujitsu PRIMEHPC FX1000 Operating Manual

Chapter 3 Starting Up
3.13 Installing/Removing the FANU
(2)
3.13

Installing/Removing the FANU

3.13.1

Installing the FANU in the Chassis

The following is the procedure for installing the FANU in the chassis.
1.
Install the FANU in the chassis.
Remarks
- Confirm that the front surface of the FANU is aligned with the front panel surface.
Figure 3.26 Removing the Dummy PSU
(1)
Figure 3.27 Installing the FANU
Lock
46
Front panel
C120-0089-03EN