Table of Contents
Advertisement
Chapter 2 Important Information
2.4 Environmental Protection
(vent holes) of the equipment. Doing so may cause malfunctions, fire, or electric shock.
- Do not insert a finger into the connector insertion opening. Doing so may cause electric shock.
- Do not block the openings (vent holes) of the equipment. Blocking the vent holes could lead to fire
caused by high temperatures inside the product.
- Do not use cleaning spray containing flammable substances when cleaning the equipment. Doing
so may cause malfunctions or fire.
- When performing pest control using pesticide near the equipment, stop the main unit and cover it
with a vinyl sheet.
- Do not splash water on the equipment. Doing so may cause malfunctions, fire, or electric shock.
- Take extreme care when moving the FX700 main unit. The work of moving it must be done by two
or more people.
- Do not place heavy objects on the equipment. Also, do not expose the equipment to shock or
vibration. Doing so may cause the equipment to become unbalanced and fall over, leading to bodily
injury.
- When transporting the equipment, always put it back in its original packaging or pack it in a
container that protects the equipment from shock and vibration. Do not unpack the equipment until
it arrives at the installation location.
- Do not use the FX700 main unit in proximity to devices, such as cell phones, that emit electromagnetic
radiation. Doing so may cause the FX700 main unit to malfunction.
- The equipment passed impact tests in accordance with JIS Z 0200, and its load bearing strength
has been confirmed. Nonetheless, take sufficient care in handling to avoid exposing the equipment
to excessive shock or vibration.
2.4
Environmental Protection
Environmentally-Friendly Product Design and Development
This product has been designed in accordance with the Fujitsu standard for "environmentally friendly
product design and development." This means that key factors such as durability, selection and labeling of
materials, emissions, packaging, and ease of dismantling and recycling have been taken into account.
This saves resources and thus reduces the harm done to the environment.
Energy-Saving Information
Devices that do not need to be constantly switched on should be switched off until they are needed as well
as during long breaks and after completion of work.
Packaging Information
This packaging information does not apply in Japan and APAC.
Do not throw away the packaging. You may need it later for transporting the equipment. If possible, the
equipment should only be transported in its original packaging.
18
C120-0089-03EN
Advertisement
Table of Contents
