Table of Contents
Advertisement
Chapter 3 Starting Up
3.2 Installation Specifications
*3
Value for an installation with all optional devices mounted. However, it does not include rack mounting rails
and cables.
(For reference, a rack mounting rail weighs 2.7 kg.)
You can calculate the weight according to the device configuration by using the following equation:
Weight = 17.7＋(4.8 x A)＋(1.6 x B)＋(1.0 x C)＋(0.03 x D) [kg]
A = Number of blades mounted (up to 4)
B = Number of PSUs mounted (up to 3)
C = Number of dummy blades mounted (up to 3)
D = Number of dummy PSUs mounted (up to 1)
*4
Even during use at the recommended ambient temperature, the fans may rotate at high speeds when the
device is overloaded or a failure is detected.
*5
Condensation not allowed
*6
Freezing temperatures not allowed
*7
The stopped state means the device is packed and in storage.
*8
The actual level of noise heard varies depending on the listening position, condition of mounting in the rack,
etc.
*9
The noise and sound power levels vary depending on the hardware configuration, load, and ambient
temperature.
*10
The stopped state means that the device is installed but powered off.
*11
Value when operating
*12
Value per input cable
*13
Value per device
23
C120-0089-03EN
Advertisement
Table of Contents
