Table of Contents
Advertisement
Chapter 3 Starting Up
3.7 Unpacking the FX700 Main Unit
3.7
Unpacking the FX700 Main Unit
This section describes the unpacking of parts.
Safety Precautions
- Do not unpack the FX700 main unit from its packaging box until it reaches the installation site.
- For details, see
1.
Carry the FX700 main unit to the installation site.
2.
Unpack all parts.
Keep the packaging as you may need it for transporting this product again.
3.
Check for damage caused during transport.
If any of the deliverables is damaged or does not match the invoice, contact the vendor immediately.
4.
Check whether the delivered goods match the details printed on the invoice.
The product name and serial number are printed on the nameplate (plate at the top of the FX700 main
unit).
5.
Protective film may be affixed to the logos (Fujitsu and FX700). If so, remove all of the film.
"Chapter 2 Important
Figure 3.6 Checking the Product Name and Serial Number
Serial number
Information."
Model name (Product name)
33
C120-0089-03EN
Advertisement
Table of Contents
