Table of Contents
Advertisement
Chapter 2 Important Information
2.3 Precautions on Handling the FX700 Main Unit
- Install the FX700 main unit on a level surface at a location not subject to strong vibration. Do not
install the main unit at a location subject to strong vibration or in an unstable location such as on a
slope. Otherwise, the main unit may fall or topple, resulting in bodily injury.
Also, to prevent danger, do not install the equipment near access aisles. If the equipment is
installed near an access route, vibration generated by walking may cause it to fail or malfunction.
2.2
Power, Voltage, and Connection Precautions
- Be sure to fully insert the power plug into the power outlet. Using the product without fully inserting
the power plug may lead to fire or malfunctions.
- Connect the grounding wire to equipment requiring a grounding connection before turning the
power on. Failing to do so may cause a short circuit, which can lead to fire or electric shock.
- The FX700 main unit is designed to work with power systems having a grounded neutral. To reduce
the risk of electric shock or malfunction, do not plug the FX700 main unit into any other type of
power system. Contact your facilities manager or a qualified electrician if you are not sure what type
of power is supplied to your building.
- Do not use household extension cords with your Fujitsu product. Household extension cords do not
have overload protection and are not meant for use with computer systems. Using household
extension cords may lead to fire or electric shock.
- Do not use the accessory power cord for other equipment or anything other than its intended
purpose. The supplied power cord is designed to be connected to and used with the FX700 main
unit, and its safety has been confirmed. Never use power cords from other products or for anything
other than their intended purpose. Otherwise, fire or electric shock may result.
- This product is also designed for an IT power system with phase-to-phase voltage 230V. (For use in
Norway)
2.3
Precautions on Handling the FX700 Main Unit
- Do not remove the cover of the FX700 main unit and the covers attached to the insertion slots
except for special cases such as installing optional equipment. If you remove a cover, always mount
the cover in its original position before turning on the equipment.
If the inside of the equipment needs to be checked or repaired, contact the hardware repair
consultation center to arrange for such work to be performed. The equipment includes high-voltage
parts and such parts may cause electric shock.
- Mount or remove optional equipment according to the procedures in the FUJITSU Supercomputer
PRIMEHPC FX700 Upgrade and Maintenance Manual (C120-0090EN). Always disconnect the
power plugs of the FX700 main unit and connected equipment from the outlets beforehand.
Otherwise, electric shock may result.
- Only connect Fujitsu-recommended products to this product. Otherwise, malfunctions, fire, or
electric shock may result.
- Do not insert or drop foreign matter, such as metallic chips or flammable material, into the openings
17
C120-0089-03EN
Advertisement
Table of Contents
