Table of Contents
Advertisement
Chapter 3 Starting Up
3.8 Mounting the Chassis in the Rack
5.
Fix the rear of the right rail in place.
When using Φ6.5 pins, fix it in place with countersunk head screws directly without washers,
depending on the size of the rack mounting hole.
Countersunk head screw x 2
6.
Tighten the four screws on the sliding part of the right rail.
Figure 3.12 Front of the Rail
Flat plate x 1
Figure 3.13 Rail Fixing Positions
Washer x 2
37
Countersunk head screw x 2
C120-0089-03EN
Advertisement
Table of Contents
