Rack System Requirements - Fujitsu PRIMEHPC FX1000 Operating Manual

Chapter 3 Starting Up
3.6 Rack System Requirements
3.6

Rack System Requirements

Basically, this product has been developed for a Fujitsu 19-inch rack. Operation of the FX700 main unit
mounted in this rack is guaranteed. To safely use the product mounted in a Fujitsu 19-inch rack, see the
related documentation at the following URL:
For the Japanese market
http://jp.fujitsu.com/platform/server/primergy/peripheral/rack/
https://jp.fujitsu.com/platform/server/primergy/manual/peri_rack.html
For the global market
http://manuals.ts.fujitsu.com/index.php?id=5406-5605-5606
If the product is mounted in a rack from another company, the customer is responsible for confirming that
the rack specifications match the FX700 main unit specifications and requirements.
Cover unused areas of the rack with dummy covers in order to conform to the ventilation concept and
ensure proper ventilation.
Power is supplied from multiple sockets installed in the rack.
Mounting Conditions for Third-Party Racks
The rack mount kit (FX700 main unit accessory) is used to mount the equipment in the rack. Therefore, if
the equipment has to be mounted in a third-party rack, confirm that the rack satisfies all of the following
structural requirements when examining rack mounting.
Check
Rack depth
Check 1 Inside distance between
front and rear support
uprights of rack
Check 2 Distance from front
support upright of rack to
inside of rear door
Check 3 Distance from front
support upright of rack to
inside of front door
Rack width
Check 4 Inside width between
support uprights of rack
Check 5 Center-to-center width
between mounting holes
in support uprights of rack
Table 3.4 Mounting Conditions for Third-Party Racks
Item
695 to 785 mm (27.4 to 30.9 in.)
920 mm (36.2 in.) or more
60 mm (2.4 in.) or more
450 mm (17.7 in.) or more
465 mm (18.3 in.) (EIA standard)
Condition
28
Referenced Diagram
Figure 3.3 Rack Depth
Figure 3.3 Rack Depth
Figure 3.3 Rack Depth
Figure 3.4 Rack Width
Figure 3.5 Support
Upright Hole Shape in
the Rack
Figure 3.4 Rack Width
Figure 3.5 Support
Upright Hole Shape in
the Rack
C120-0089-03EN