Table of Contents
Advertisement
TiX620, TiX640, TiX660, TiX1000
Users Manual
Warning
To prevent eye damage and personal injury:
•
Do not look into the laser. Do not point
laser directly at persons or animals or
indirectly off reflective surfaces.
•
Do not open the Product. The laser beam
is dangerous to eyes. Have the Product
repaired only through an approved
technical site.
•
Do not locate the laser beam so that it is
at eye level when you install the
thermography system.
Settings Menu
The "Settings" menu contains functions for system and
hardware setting regarding the thermal imager.
hvh222.jpg
3-36
Shop for Fluke products online at:
Calibration Submenu
The thermal imager is calibrated to measure
temperatures in the range of (-40...1,200) °C. Depending
on the equipment, the total measuring range and the
individual ranges of your device may deviate from this
standard calibration. The actually available ranges can be
found in the "Calibration" menu item:
Depending on the object temperature and the
measurement assignment, the measuring ranges can be
set manually or automatically. However, it must be
ensured that the temperature of the current scene does
not exceed the set range to avoid overloads within the IR
image.
MyFlukeStore
www.
hvh223.jpg
1.888.610.7664
.com
Advertisement
Table of Contents
