Device Settings Menu - Fluke TiS20+ User Manual

TiS20+
Users Manual
a
3. Push to select Position.
:
shows on the display.
4. To move the box, drag the center of the box or push
s
5. Push to set the change and exit the menu.

Device Settings Menu

Table 10 lists the options in the Device Settings menu.
Option Menu
Backlight
File Format
Units
Distance
Change
Filename
16
Table 10. Device Settings Menu
Option
Use the slider bar to set the brightness level of the
NA
display.
Saves images as an .is2 file.
Choose the .is2 file format when image modification and
maximum resolution is needed.
The .is2 file format consolidates the infrared image,
IS2
radiometric temperature data, visible image, notes, and
tags into a single file. To customize or separate the
visible and infrared images, use Fluke Connect desktop
software.
Use to assign an asset ID tag or to flag an asset image.
Saves images as a .jpg file.
Choose the .jpg file format for images with the smallest
JPEG
file size, where modification is not needed, and image
quality and resolution are not as important.
Sets the temperature units. This option is not available in
<options>
all countries.
Sets the distance to use to adjust the parallax correction
<options> between the IR camera lens and visual light camera
lens.
Sets the units to use to measure distance. This option is
Units
not available in all countries.
Filename Changes the default filename that starts with IR_ to a
Prefix different 4-character prefix.
Reset
Filename Resets the file number to 00001.
Numbers
W X Y
/ /
Description
Z
/ .