TiX620, TiX640, TiX660, TiX1000
Users Manual
Saving with Check
To check the image to be recorded before saving it, the
Live mode should be stopped:
1.
Push the button halfway down.
The live image is frozen: .
•
The frozen image can initially be "checked" on
the display or viewfinder.
•
If the image is not to be saved, push the
button: .
2.
Push the button completely.
The image is saved.
The process of writing the data is indicated by the
changing color of the map symbol (in the line below the
image, right-hand side):
camera control automatically activates the Live mode:
.
2-10
Shop for Fluke products online at:
Quick Saving
Using the thermal imager, you can immediately save
images in the Live mode or directly from the motion:
•
Deviating from the factory setting described in
Table 2-3, the button can be used to trigger
further functions such as shutter activation,
autofocus, visible light image-LED, laser
distance meter/laser pointer before saving the
image.
. When saving, the
MyFlukeStore
www.
Immediately push the button completely. The
image is saved immediately:
camera control then automatically re-activates
the Live mode: .
Note
1.888.610.7664
.com
, the