Checking And Editing Destinations - Kyocera ECOSYS M3645dn Operation Manual

Operation on the Machine > Sending

Checking and Editing Destinations

Check and edit a selected destination.
1
2
3
Display the screen.
Specify the destination.
Specifying Destination (page 5-14)
Check and edit the destination.
Select the [Confirm/Add Destination] key.
Add the destination
1
Select [Add].
2
Set the destinations to be added.
Specifying Destination (page 5-14)
Edit the destination
1
Select the destination you want to edit, and select the [OK] key.
2
[▲] [▼] key > [Detail/Edit] > [OK] key
3
Edit the destinations > [OK] key
Specifying Destination (page 5-14)
NOTE
To edit a destination registered in the address book or a One Touch Key, refer to the
following:
Editing and Deleting Address Book Entries (page 3-30)
Editing and Deleting One Touch Key (page 3-32)
Delete the destination
1
Select the destination you want to delete, and select the [OK] key.
2
[▲] [▼] key > [Delete] > [OK] key > [Yes]
Select [Exit].
NOTE
When selecting [On] for Destination Check before Send, the confirmation screen appears
after pressing the [Start] key.
Check beforeSend (page 8-41)
Confirmation Screen of Destinations (page 5-21)
5-20