Setup and Registration (System Menu) > System Menu
Send
[System Menu/Counter] key > [▲] [▼] key > [Send] > [OK] key
Configures settings for sending functions.
Item
Select Key Set.
DestinationCheck
Check beforeSend
Check New Dest.
New Dest. Entry
Recall Dest.
Broadcast
Default Screen
Send and Forward
Forward
Destination
*1 Only on products with the fax function installed.
*2 Also applies when sending the fax.
FAX
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key
Configure settings for FAX.
FAX Operation Guide
Commonly used sending functions can be registered to the Select key. Functions can be easily
configured by selecting the Select key.
Value: None, Quiet Mode, Color Selection, Original Size, Original Image,
Scan Resolution, Sending Size, Zoom, Orig. Orientation, Mixed Size Orig.,
Continuous Scan, File Format, File Name Entry, Subject/Body, Long Original,
JobFinish Notice, FAX Resolution
*1
FAX RX Polling
, FAX TX Report
Sharpness, Backgrnd Density, Prevent Bleed-t, Skip Blank Page
Set the confirmation of destinations.
Select whether to display the confirmation screen of destinations after pressing the [Start] key
when performing sending jobs.
Value: Off, On
When adding new destination, select whether to display the entry check screen to check the
entered destination.
Value: Off, On
Select whether to permit direct entry of destination.
Value: Permit, Prohibit
Select whether to permit usage of [Recall] on the Send screen.
Value: Permit, Prohibit
Set whether to enable broadcast.
Value: Permit, Prohibit
Use this procedure to set the default screen displayed when you select the [Send] key.
Value: Destination, Address Book
Set whether to send the original to another destination and store it when sending images.
Set the rule to send the original.
Value: Off, On
NOTE
When selecting [On], select rules to forward from [E-mail], [Folder (SMB)], [Folder (FTP)] and
*1
[FAX]
.
Set the destination to which the original is forwarded. One destination can be set. You can
check and edit the set address.
Follow the steps below to register the destination.
•
Address Book
•
Address Entry
Specifying Destination (page 5-14)
8-41
Description
*1
*1
, FAX Direct TX
, FAX Delayed TX
*1
, Density, Duplex, FTP Encrypted TX, File Separation,
*2
*2
*1
,
*2