Formatting A Memory Card - Fostex FR-2LE Owner's Manual

FR-2LE
The FR-2LE accommodates memory cards formatted with the FAT32 file system.
When you use an unformatted memory card or a card which is formatted with a file
system other than FAT32, format it by the following procedure.
In the following procedure, it is assumed that a non-FAT32 formatted card is loaded,
and the display shows the warning message ("Illegal Format!").
MIC L
1) While the warning message is shown, press the [MENU/ENTER] key.
The display automatically changes to show the "Format" menu item on the "Disk" menu, as
shown below.
You can select a reel number and recording format (FS/BIT mode) of the memory card to
be formatted. In the following example, it is assumed that you do not change the reel
number and only set the recording format.
You can also edit the reel number after formatting a card (see page 97 for details).
2) While "FS/BIT Mode=*****/**" is highlighted, press the [MENU/ENTER] key.
The current recording format starts flashing and you can now make selection (the default
format is "BWF44/16").
By pressing the [+] or [-] key while the current recording format is flashing, you can select
the desired recording format. The available options are listed on the following table.
Field Memory Recorder (Chapter 2: Before using the FR-2LE)

Formatting a memory card

FR-2LE FIELD MEMORY RECORDER
5
MENU /
LIGHT ENTER
CONTRAST SHIFT QUICK SET
PREV FILE NEXT
LOC LOCK MIC R
REWIND F FWD MARK
DEL MARK
STOP/CANCEL PLAY
ABS0
REC END
1, 2, 3, 4
3
3, 4
27