Prevent The Media From Sticking And Wrinkling - Oki IP-7900-21 Advanced Operation Manual

Prevent the media from sticking and wrinkling

■ Decrease the platen suction fan level
The vacuum pressure applied to the media in the printing zone helps to hold the media down on the platen, which keeps
the distance from media to print heads constant.
When the media sticks to the platen, set the vacuum pressure to LOW. The LOW vacuum pressure is also effective when
your media is so flexible and easily wrinkled.
1
á I N K M E D I A R E G â
ß M E D I A
2
# S E L E C T M E D I A
> 0 1 : P A P E R
3
# S U C T I O N F A N L E V E L
> 0 1 : H I G H
4
# S U C T I O N F A N L E V E L
[ 0 1 : H I G H
5
# S U C T I O N F A N L E V E L
[ 0 1 : L O W
# S U C T I O N F A N L E V E L
> 0 1 : L O W
■ Change the media advance mode
Select the media advance mode according to the media used.
1
á I N K M E D I A R E G â
ß M E D I A
2
# S E L E C T M E D I A
> 0 1 : P A P E R
30
IP-7900-20/21/7700-20/21 Advanced Operation Guide
M . A D V à
[
• • •
x2
M . A D V à
[
• • •
Set the Printer to offline state and press the
key.
key scroll to [#SUCTION FAN
With the
LEVEL]
Press the key.
Press the key twice.
Press the key.
Set the Printer to offline state and press the
key.
key scroll to [#MEDIA ADV
With the
MODE]