[Adjust Printer] - Oki C911dn User Manual

[Adjust printer]

Auto density compensation mode
Auto BG compensation mode
*1: Displayed if [Auto density compensation mode]
in the control panel is set to [ON].
Concentration compensation
Color misalignment compensation
Fixing speed compensation
Card stock mode
Density setup Cyan Density
Magenta Density
Yellow Density
Black Density
White Density
*2: Displayed when using white
toner in C941/ES9541dn.
Clear Density
*3: Displayed when using clear
toner in C941/ES9541dn.
Item
ON
OFF
*1
OFF
-1
0
+1
+2
Implement
Implement
OFF
-5
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
Auto
ON
OFF
-3
to
0
to
+3
-3
to
0
to
+3
-3
to
0
to
+3
-3
to
0
to
+3
*2
-3
to
0
to
+3
*3 -3
to
0
to
+3
Table of setting items in the device setup screen
Sets whether to automatically compensate density
and shade.
Compensates for print results variation due to
differences in the temperature and humidity
environments, print density, and print frequency.
Changes the value if there is burr in the image or
the underlay is dark.
Implements density compensation. Implement
when the device is in standby mode.
Implements auto color misalignment compensation operations.
Implement when the device is in standby mode.
Compensates the fixing speed during card stock
printing.
Sets the card stock mode. Suppresses misalignment of
the image training edge during card stock printing.
Enabled for ultra card stock 4 and ultra card stock 5.
Adjusts the cyan density.
This setting is enabled from printing after the
density compensation has been implemented.
Adjusts the magenta density.
Adjusts the yellow density.
Adjusts the black density.
Adjusts the white density.
Adjusts the clear density.
- 301 -
z Shaded areas are factory-set values.
Details
1
2
3
4
5