Mitsubishi Electric FR-F820-04750 Instruction Manual page 233

Parameters
Disabling parameter write (Pr. 77 = "1")
● Parameter write, parameter clear and all parameter clear are disabled. (Parameter read is enabled.)
● The following parameters can be written even if Pr. 77 = "1".
Pr.
22
75
77
79
160
296
Tab. 5-28:
Writing during operation is disabled. To change the parameter setting value, stop the operation.
FR-F800
Name
Stall prevention operation level
Reset selection/disconnected PU
detection/PU stop selection
Parameter write selection
Operation mode selection
User group read selection
Password lock level
Parameters, that can be written even if Pr. 77 = 1
(E) Environment setting parameters
Pr. Name
297 Password lock/unlock
345, 346 (DeviceNet communication)
496, 497 (Remote output)
656 to 659 (Analog remote output)
805 Torque command value (RAM)
997 Fault initiation
5 - 71